Ross Technology announces an industry first as its (XT-4200) Post and Beam Gate becomes the first electro-mechanical rising beam barrier to meet the ASTM M50 P1 crash test standard. Touted as a high-security solution, the gate is ideal for guarding access control points with wide entrances, eliminating the need to install and maintain multiple wedge barriers or bollards. The Larson Institute, at The Pennsylvania State University, performed the test in accordance with ASTM Standard Test Method F2656-15 Vehicle Crash Testing of Perimeter Barriers.
The impact condition designation for the test was set for M50 with a penetration level of P1. To achieve an M50 P1 rating, a medium-duty truck weighing 15,000 pounds is crashed into the test article at a speed of 50 mph. The resulting dynamic penetration of the leading edge of the truck’s cargo bed must be less than 1 meter beyond the pre-test inside edge of the crash beam. The maximum dynamic penetration of the XT-4200 was measured to be 0.42 meter (16.7 inches).
Crash tested with a 24’ clear opening, this barrier is not only a cost-effective solution for securing wide entrances, it’s also designed with an all-electric system and continuous-duty rated motor to provide long-term reliability and reduced downtime. The motor and drive system are located within the posts, so they are shielded from the elements to deter corrosion. This design also provides easy access for service. Learn more product specifications.
Ross Perimeter Security Product Manager, Scott Espensen calls the testing another step in Ross’ commitment to provide innovative products. “Passing the ASTM F2656 test with a M50 P1 rating on our first attempt is a credit to our engineering and design process. We’re excited to offer our customers a gate system that can be integrated seamlessly with our M50 P1 Anti-Ram Fence, creating a turnkey perimeter security solution.”
The Larson Institute is accredited as a testing laboratory in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories.